Muffler - Rear Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.

Secure the rear muffler assembly to the rubber hangers on the tail pipe end.

Fig 1: Securing Rear Muffler Assembly To Rubber Hangers On Tail Pipe End
Courtesy of SUZUKI OF AMERICA CORP.
Secure the nuts and the gasket from the rear muffler pipe flange-to-front muffler pipe flange.
Tighten:

Tighten the front muffler-to-rear muffler nuts to 30 N.m (22 lb-ft).

Fig 2: Identifying Nuts And Rear Muffler Pipe Flange
Courtesy of SUZUKI OF AMERICA CORP.