LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Engine Exhaust System) >> Repair Instructions >> Muffler - Front Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Muffler - Front Removal and Installation: Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the nuts and the gasket from the front muffler pipe to the exhaust front pipe flange.
  2. Disconnect the front muffler from the rubber hanger.
    Fig 1: Disconnecting Front Muffler From Rubber Hanger
    G04716765Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove the nuts and the gasket from the rear muffler pipe flange.
  4. Remove the front muffler.
  5. Check the exhaust pipe and the front muffler for holes, damage, open seams or other deterioration which could permit exhaust fumes to seep into the passenger compartment or the trunk.
    Fig 2: Identifying Nuts And Rear Muffler Pipe Flange (1 Of 2)
    G04716766Courtesy of SUZUKI OF AMERICA CORP.