LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Engine Electrical Devices) >> Engine Electrical Devices >> Throttle Body Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle Body Removal and Installation: Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Disconnect the Intake Air Temperature (IAT) sensor connector.
  3. Disconnect the breather hose from the valve cover.
    Fig 1: Valve Cover Breather Hose
    G04716364Courtesy of SUZUKI OF AMERICA CORP.
  4. Remove the air intake tube.
  5. Disconnect the vacuum hoses from the throttle body.
  6. Disconnect the Electric Throttle Control (ETC) connectors.
  7. Disconnect the coolant hoses from the throttle body.
  8. Remove the throttle body retaining nuts.
    Fig 2: Throttle Body Retaining Nuts
    G04716365Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals