LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Instrumentation/Driver Info./Horn) >> Repair Instructions >> Horns Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Horns Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
  1. Install the horn with the bolt.

    Tighten: 

    Tighten the horn bolt to 20 N.m (15 lb-ft). (Left horn shown, right horn similar, if equipped.)

  2. Connect the electrical connector.
  3. Connect the negative battery cable.
    Fig 1: Identifying Horn
    G04718155Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals