LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Aux. Emission Control Devices) >> Repair Instructions >> Exhaust Gas Recirculation Valve Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Exhaust Gas Recirculation Valve Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the EI system ignition coil adapter mating surface.
  2. Install a new EGR valve gasket.
  3. Install the EGR valve with the bolts.

    Tighten: 

    Tighten the exhaust gas recirculation valve retaining bolts to 30 N.m (22 lb-ft).

  4. Connect the vacuum hose to the EGR valve.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals