Fuel Sender Removal and Installation: Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the insulator connector.

Fig 1: Disconnecting Insulator Connector
Courtesy of SUZUKI OF AMERICA CORP.
Push the terminal wedge (1) in the insulator connector.

Fig 2: Pushing Terminal Wedge In Insulator Connector
Courtesy of SUZUKI OF AMERICA CORP.
Push the wedge (1) outside and then pull the wires to disconnect from insulator.

Fig 3: Disconnecting Insulator
Courtesy of SUZUKI OF AMERICA CORP.
Remove the fuel-level sensor (1) from the sender-housing (2).
Remove the sender-housing (2).

Fig 4: Removing Sender-Housing
Courtesy of SUZUKI OF AMERICA CORP.
Remove fuel sender assembly (3).

Fig 5: Removing Fuel Sender Assembly
Courtesy of SUZUKI OF AMERICA CORP.