Fuel Sender Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.

Wind the wires (1) the sender assembly (2).

Fig 1: Identifying Wires At Sender Assembly
Courtesy of SUZUKI OF AMERICA CORP.
Install the sender assembly onto the fuel pump assembly (1).
Install the fuel-level sensor onto the sender-housing.

Fig 2: Installing Fuel-Level Sensor Onto Sender-Housing
Courtesy of SUZUKI OF AMERICA CORP.
Connect the wire into the insulator connector.

Fig 3: Identifying Wire Into Insulator Connector
Courtesy of SUZUKI OF AMERICA CORP.
Connect the insulator connector.

Fig 4: Identifying Insulator Connector
Courtesy of SUZUKI OF AMERICA CORP.