LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Fuel System) >> Repair Instructions >> Fuel Pump Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the gasket mating surface on the fuel tank.
  2. Position the new gasket in place.
  3. Install the fuel pump into the fuel tank in the same location as removed for ease of line and connector installation.
  4. Install the fuel pump assembly clip.
  5. Connect the fuel pump assembly connector.
  6. Install the fuel pump line.
    Fig 1: Identifying Electrical Connector At Fuel Pump Assembly
    G04716647Courtesy of SUZUKI OF AMERICA CORP.
  7. Install the fuel pump access cover.
  8. Connect the negative battery cable.
  9. Perform an operational check of the fuel pump.
  10. Install the rear seat. Refer to REAR SEAT CUSHION REMOVAL AND INSTALLATION .
    Fig 2: Identifying Fuel Pump Access Cover
    G04716646Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals