Controls Diagnosis
WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
CONTROLS DIAGNOSIS
| Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
| 1 | Verify the customer's complaint. Are the customer's concerns verified? |
- | Go to Step 2 | System OK |
| 2 | Move controls other than the temperature adjustment. Is an excessive effort required to move the controls? |
- | Go to Step 15 | Go to Step 3 |
| 3 | Move the temperature control. Is an excessive effort required to move the controls? |
- | Go to Step 6 | Go to Step 4 |
| 4 | Move the temperature control. Does the temperature door move too easily? |
- | Go to Step 5 | System OK |
| 5 | Remove the cable from the controller. Does the control knob turn freely, without the click stops? |
- | Go to Step 15 | - |
| 6 | Check the cables for improper routing, kinks, wiring interference, or other instrument panel interference. Is there a problem? |
- | Go to Step 7 | Go to Step 8 |
| 7 | Repair as needed. Is the repair complete? |
- | System OK | - |
| 8 |
Is there any door binding? |
- | Go to Step 9 | Go to Step 12 |
| 9 | Check a binding door for shaft alignment, a bent shaft, a bent door, or a warped case. Is the door seal OK? |
- | Go to Step 10 | Go to Step 11 |
| 10 |
Is the repair complete? |
- | System OK | - |
| 11 | Repair the door seal, as needed. Is the repair complete? |
- | System OK | - |
| 12 | Check for control binding. Does the control bind? |
- | Go to Step 14 | Go to Step 13 |
| 13 |
Is the repair complete? |
- | System OK | - |
| 14 |
Does the control bind? |
- | Go to Step 15 | Go to Step 16 |
| 15 | Replace the control. Is the repair complete? |
- | System OK | - |
| 16 | Replace the cable. Is the repair complete? |
- | System OK | - |