LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Steering Wheel And Column) >> Repair Instructions >> Wiper Switch and Lever Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Wiper Switch and Lever Removal and Installation: Removal

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the upper and the lower steering column cover panel screws.
  3. Remove the upper and the lower steering column cover panels.
    Fig 1: Removing Upper And Lower Steering Column Cover Panel Screws
    G04103915Courtesy of SUZUKI OF AMERICA CORP.
  4. Remove the wiper switch by pushing the tabs on the top and the bottom of the switch housing.
  5. Disconnect the electrical connector from the wiper switch.
    Fig 2: Disconnecting Electrical Connector From Wiper Switch
    G04103916Courtesy of SUZUKI OF AMERICA CORP.