LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Steering Wheel And Column) >> Repair Instructions >> Wiper Switch and Lever Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Wiper Switch and Lever Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector to the wiper switch.
  2. Install the wiper switch by snapping it into the switch housing.
    Fig 1: Connecting Electrical Connector To Wiper Switch
    G04103917Courtesy of SUZUKI OF AMERICA CORP.
  3. Install the upper and the lower steering column cover panels. Install the upper and the lower steering column cover panel screws.

    Tighten 

    Tighten the upper and the lower steering column cover panel screws to 2.5 N.m (22 lb-in).

  4. Connect the negative battery cable.
    Fig 2: Installing Upper And Lower Steering Column Cover Panel Screws
    G04103918Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals