LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Steering Wheel And Column) >> Repair Instructions >> Steering Wheel Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Wheel Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clip the contact ring on the steering wheel, if necessary.
    NOTE: In order to correctly install the steering wheel, match-mark the steering column shaft to the steering wheel.
  2. Align the match marks on the steering wheel and the steering column shaft. Turn the signal canceling cam on the wheel to the left.
  3. Install the retaining clip and the steering wheel nut.

    Tighten 

    Tighten the steering wheel nut to 38 N.m (28 lb-ft).

  4. Bend the tabs to secure the retaining clip.
  5. Install the SIR Module. Refer to "DRIVER AIRBAG MODULE REMOVAL AND INSTALLATION :".
  6. Connect the negative battery cable.
    Fig 1: Installing Retaining Clip And Steering Wheel Nut
    G04103925Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals