Ignition Lock Cylinder and Switch Removal and Installation: Removal

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the upper and the lower steering column cover panel by removing the screws.

Fig 1: Removing Upper And Lower Steering Column Cover Panel By Removing Screws
Courtesy of SUZUKI OF AMERICA CORP.
With the key in the ignition turned to the position designated ACC, remove the lock cylinder by pressing down the detent spring and pulling the lock cylinder out of the switch cylinder housing.

Fig 2: Removing Lock Cylinder By Pressing Down Detent Spring
Courtesy of SUZUKI OF AMERICA CORP.
Remove the ignition switch retaining screw.
Disconnect the wiring and remove the ignition switch.

Fig 3: Removing Ignition Switch Retaining Screw
Courtesy of SUZUKI OF AMERICA CORP.