Front Wheel Speed Sensor Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.

Install the front wheel speed sensor to the steering knuckle. Secure it with the bolt.
Tighten

Tighten the front wheel speed sensor bolt to 8 N.m (71 lb-in).

Fig 1: Installing Front Wheel Speed Sensor To Steering Knuckle
Courtesy of SUZUKI OF AMERICA CORP.
Feed the sensor harness into the engine compartment, insert it into the grommet, and secure the grommet into the hole in the strut tower.
Secure the harness into the grommet holders and the clamps under the fender.
Install the wheel. Refer to "WHEEL REMOVAL AND INSTALLATION :".
Lower the vehicle.
Connect the front wheel speed sensor electrical connector.
Connect the negative battery cable.

Fig 2: Connecting Front Wheel Speed Sensor Electrical Connector
Courtesy of SUZUKI OF AMERICA CORP.