LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Interior Trim) >> Repair Instructions >> Rear Door Trim Panel Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Door Trim Panel Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the trim panel.
  2. Connect the power window control switch electrical connector, if equipped.
  3. Install the power window control switch.
  4. Install the door trim panel screws.

    Tighten 

    Tighten the door trim panel screws to 2.5 N.m (22 lb-in).

  5. Install the inside door handle trim bezel.
  6. Raise the rear window.
scientia non olet · About LEMON Manuals