LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Interior Trim) >> Repair Instructions >> Floor Carpet Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Floor Carpet Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the floor carpet.
  2. Install the gearshift housing with the bolts.

    Tighten 

    Tighten the gearshift housing bolts and nuts to 8 N.m (70 lb-in).

  3. Install the floor console. Refer to "FLOOR CONSOLE REMOVAL AND INSTALLATION :".
  4. Install the left and the right kick panels.
  5. Install the front seats. Refer to "FRONT BUCKET SEAT REMOVAL AND INSTALLATION :".
  6. Install the left and the right lower B-pillar trim panels. Refer to "LOWER B-PILLAR TRIM PANEL REMOVAL AND INSTALLATION :".
  7. Install the left and the right front rocker trim panels.
  8. Install the left and the right lower front seat belt anchors to the B-pillar with the bolts.

    Tighten 

    Tighten the seat belt anchor bolts to 38 N.m (28 lb-ft).

  9. Install the left and the right rear rocker trim panels. Refer to "REAR ROCKER TRIM PANEL REMOVAL AND INSTALLATION :".
  10. Install the rear seat cushion. Refer to "REAR SEAT CUSHION REMOVAL AND INSTALLATION :".
  11. Connect the negative battery cable.
    Fig 1: Installing Left And Right Lower Front Seat Belt Anchors To B-Pillar With Bolts
    G04104626Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals