LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Rear Suspension) >> Repair Instructions >> Knuckle Disassembly and Assembly >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knuckle Disassembly and Assembly: Assembly

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the back plate. Refer to "HUB AND PARKING BRAKE SHOE / BACKPLATE REMOVAL AND INSTALLATION :".
  2. Install the rear disc brake assembly. Refer to "HUB AND PARKING BRAKE SHOE / BACKPLATE REMOVAL AND INSTALLATION :".
  3. Install the wheel hub. Refer to "HUB AND BEARING ASSEMBLY REMOVAL AND INSTALLATION :".
  4. Install the brake caliper and brake rotor. Refer to "CALIPER REMOVAL AND INSTALLATION :" and "ROTOR REMOVAL AND INSTALLATION :".
  5. Install the knuckle into the vehicle. Refer to "KNUCKLE ASSEMBLY REMOVAL AND INSTALLATION :".
scientia non olet · About LEMON Manuals