Electronic Ignition System Ignition Coil Removal and Installation: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
- Install the EI system ignition coil into the mounting location and install the retaining bolts.
Tighten: Tighten the electronic ignition system ignition coil retaining bolts to 10 N.m (89 lb-in).
- Connect the EI system ignition coil connector.
- Install the ignition wires.
- Connect the negative battery cable.