LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 179 (Air Bag System) >> Repair Instructions >> Sensing and Diagnostic Module (SDM) Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensing and Diagnostic Module (SDM) Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, and 2007 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable the Supplemental Inflatable Restraints (SIR). Refer to Disabling the Supplemental Inflatable Restraints (SIR)  .
  2. Remove the floor console. Refer to FLOOR CONSOLE REMOVAL AND INSTALLATION .
  3. Remove the connector position assurance lock, which is tethered to SDM connector.
  4. Disconnect the SDM electrical connector.
  5. Remove the SDM mounting bolts.
  6. Remove the SDM.
scientia non olet · About LEMON Manuals