Front Seat Heater Wire Inspection (If Equipped)
WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
- Confirm that seat heater switch is OFF position.
- Disconnect coupler of seat heater under the seat cushion.
- Measure resistance between terminals as shown below. If resistance is out of specification, replace faulty seat cushion and/or seat back including seat heater.
Seat heater circuit resistance
Seat cushion side [A] (between terminal "B" and "C", between terminal "A" and "C"): 4.7 - 5.7 Ω (at 20 °C, 68 °F)
Seat back side [B] (between terminal "F" and "D": 10.7 - 13.1 Ω (at 20 °C, 68 °F)