Using Monitor Connector (If Equipped)
WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch to ON position and wait about 6 seconds or more.
- Using service wire (4), repeat shorting and opening between diagnosis switch terminal (3) on "AIR BAG" monitor coupler (1) and body ground (2) 5 times at about 1 second intervals within 10 seconds.
- Perform DTC Check and confirm that normal DTC (NO. 0000) is displayed and not malfunction DTC.NOTE: If DTC B1013 or B1021 is stored in SDM, it is not possible to clear all DTC.