Side-Air Bag (Inflator) Module Removal and Installation: Installation

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Reference: SIDE-AIR BAG (INFLATOR) INSPECTION:ADVANCED AIR BAG

Confirm sleeve (1) is surely installed in side-air bag (inflator) module.
Tighten sleeve lock nut (2) to specified torque.
Tightening torque

Sleeve lock nut a: 2.5 N.m (0.25 kg-m, 2.0 lb-ft)
Install new clip to seat back.

Fig 1: Identifying Seat Back Clip
Courtesy of SUZUKI OF AMERICA CORP.
Connect side-air bag (inflator) module connector (1) securely as shown in the figure.
1. Connect connector.
2. Lock connector with lock button (2).
  
  Fig 2: Connecting Side-Air Bag (Inflator) Module Connector
  Courtesy of SUZUKI OF AMERICA CORP.
Insert claw (1) of side-air bag (inflator) module on installation hole (2).
Push side-air bag (inflator) module into clip (3) with specified force.
Side-air bag (inflator) module installation force

Pushing force: 180 N

Fig 3: Installing Side-Air Bag (Inflator) Module Into Clip
Courtesy of SUZUKI OF AMERICA CORP.