Side Curtain-Air Bag (Inflator) Module Removal and Installation: Installation

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Reference: SIDE CURTAIN-AIR BAG (INFLATOR) MODULE INSPECTION:ADVANCED AIR BAG

WARNING: Do not install side curtain-air bag (inflator) module while twisted or bent. Otherwise, side curtain-air bag (inflator) module may not deploy and injury may result.

Install side curtain-air bag (inflator) module (1) with clip (2) and bolts.
Tighten side curtain-air bag (inflator) module bolts (3) to specified torque.
Tightening torque

Side curtain-air bag (inflator) module bolts a: 10 N.m (1.0 kg-m, 7.5 lb-ft)

Fig 1: Identifying Side Curtain-Air Bag (Inflator) Module Bolts And Clip
Courtesy of SUZUKI OF AMERICA CORP.
Connect side curtain-air bag (inflator) module connector (1) securely as shown in the figure.
1. Connect connector.
2. Lock connector with lock button (2).
  
  Fig 2: Connecting Side Curtain-Air Bag (Inflator) Module Connector
  Courtesy of SUZUKI OF AMERICA CORP.
Install head lining referring to HEAD LINING REMOVAL AND INSTALLATION .
Enable air bag system. Refer to ENABLING AIR BAG SYSTEM:ADVANCED AIR BAG .