SDM Removal and Installation: Installation

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Reference: SDM INSPECTION:ADVANCED AIR BAG

Check that none of the following faulty conditions exists.
- Bend, scratch, deformity in vehicle body where SDM is mounted.
- Foreign matter or rust on mating surface of vehicle body where SDM is mounted.
Install SDM (2) to vehicle.
CAUTION: Ensure that arrow on the SDM is pointing toward the front of the vehicle.
Tighten SDM bolts (1) to specified torque.
Tightening torque

SDM bolt a: 6 N.m (0.6 kg-m, 4.5 lb-ft)

Fig 1: Identifying SDM Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Connect SDM connector (1) to SDM (2) securely.

Fig 2: Connecting SDM Connector To SDM
Courtesy of SUZUKI OF AMERICA CORP.
Install console rear panel.
Enable air bag system referring to ENABLING AIR BAG SYSTEM:ADVANCED AIR BAG .
Connect negative (-) cable at battery.