Passenger Air Bag (Inflator) Module Removal and Installation: Installation

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Install passenger air bag (inflator) module (1) to instrument panel as shown.
Tighten passenger air bag (inflator) module attaching bolts (2) to specified torque.
Tightening torque

Passenger air bag (inflator) module attaching bolt a: 23 N.m (2.3 kg-m, 16.5 lb-ft)

Fig 1: Identifying Passenger Air Bag (Inflator) Module
Courtesy of SUZUKI OF AMERICA CORP.
Connect passenger air bag (inflator) module connector (1) securely as shown in the figure.
1. Connect connector.
2. Lock connector with lock button (2).
  
  Fig 2: Connecting Passenger Air Bag (Inflator) Module Connector
  Courtesy of SUZUKI OF AMERICA CORP.
Enable air bag system. Refer to ENABLING AIR BAG SYSTEM:ADVANCED AIR BAG .