LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 170 (Wipers/Washers) >> Repair Instruction >> Windshield Wiper Removal And Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Windshield Wiper Removal And Installation: Installation

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install windshield wiper assembly (1), and tighten bolts ("1"-"3") according to numerical order shown in figure.

    Tightening torque 

    Windshield wiper bolt a: Tighten 8.5 N.m (0.85 kgf-m, 6.5 lb-ft) by specified procedure 

    Fig 1: Identifying Windshield Wiper Bolt
    G04809809Courtesy of SUZUKI OF AMERICA CORP.
  2. Connect coupler to windshield wiper motor.
  3. Install cowl top garnish referring to COWL TOP COMPONENTS .
  4. Install windshield wiper arms with wiper blades (1) to specified position as shown in figure, and then tighten windshield wiper nuts to specified torque.

    Tightening torque 

    Windshield wiper arm nut a: 14 N.m (1.4 kg-m, 10.5 lb-ft) 

  5. Install wiper pivot caps (2) to windshield wiper arm nuts
    Fig 2: Identifying Wiper Pivot Caps
    G04809810Courtesy of SUZUKI OF AMERICA CORP.
  6. Connect negative (-) cable to battery.
scientia non olet · About LEMON Manuals