Front Wheel Speed Sensor Removal And Installation: Removal

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative (-) cable from battery.
Disconnect front wheel speed sensor coupler (1).
Hoist vehicle and remove wheel.
Remove harness clamp, clamp bolts (2) and grommet (3).
Remove front wheel speed sensor (4) from knuckle.
CAUTION:
- Do not pull wire harness when removing front wheel speed sensor.
- Do not cause damage to surface of front wheel speed sensor and do not allow dust, etc. to enter its installation hole.
  
  Fig 1: Identifying Front Wheel Speed Sensor
  Courtesy of SUZUKI OF AMERICA CORP.