LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 167 (Brakes - Abs) >> Diagnostic Information And Procedures >> DTC Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch to OFF position.
  2. Connect SUZUKI scan tool to data link connector (1).

    Special Tool 

    1. SUZUKI scan tool 
      Fig 1: Connecting SUZUKI Scan Tool To Data Link Connector
      G04808458Courtesy of SUZUKI OF AMERICA CORP.
  3. Turn ignition switch to ON position.
  4. Read DTC according to instructions displayed on SUZUKI scan tool and print it or write it down. Refer to scan tool operator's manual for further details.
    NOTE: If SUZUKI scan tool can not communicate ABS (ESP®) hydraulic unit/control module, perform SERIAL DATA LINK CIRCUIT CHECK .
  5. After completing the check, turn ignition switch off and disconnect SUZUKI scan tool from DLC.
scientia non olet · About LEMON Manuals