LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 167 (Brakes - Abs) >> Diagnostic Information And Procedures >> DTC C1061: Pump Motor And/Or Motor Driver Circuit >> DTC Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Troubleshooting

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
TROUBLESHOOTING CHART

Step Action YES NO
Was "ABS Check" performed?  Go to Step 2. Go to ABS CHECK .
  1. Turn Ignition switch to OFF position.
  2. Disconnect ABS (ESP®) control module connector.
  3. Check for proper connection to ABS (ESP®) control module connector at terminal "E03-1" (or "E53-32").
  4. If OK, then measure voltage between terminal "E03-1" (or "E53-32") of module connector and body ground.

Is it 10 - 14 V? 
Go to Step 3. "WHT/BLU" circuit open.
Measure resistance between terminal "E03-13" and "E03-26" (or "E53-16" and "E53-47") of ABS (ESP®) hydraulic unit/control module connector and vehicle body ground.
Is resistance less than 1 Ω? 
Substitute a known-good ABS (ESP®) hydraulic unit/control module assembly and recheck. Ground circuit for ABS (ESP®) control module open or high resistance.