Air Fuel Ratio (A/F) Sensor (Sensor-1) Removal And Installation: Installation

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Reverse removal procedure noting the followings.

Tighten A/F sensor to specified torque.
Tightening torque

A/F sensor a: 45 N.m (4.5 kg-m, 32.5 lb-ft)

Fig 1: Identifying Air Fuel Ratio (A/F) Sensor
Courtesy of SUZUKI OF AMERICA CORP.
Connect connector of A/F sensor and clamp wire harness securely.
Install new gasket to EGR pipe.
After installing A/F sensor, start engine and check that no exhaust gas leakage exists.