LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Precautions - General Information) >> Repair Instructions >> Electrical Circuit Inspection Procedure >> Continuity Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Continuity Check

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure resistance between connector terminals at both ends of the circuit being checked (between "A-1" and "C-1" in figure). If no continuity is indicated (infinity or over limit), that means that the circuit is open between terminals "A-1" and "C-1".
    Fig 1: Measuring Resistance Between Connector Terminals A-1 & C-1
    G04806980Courtesy of SUZUKI OF AMERICA CORP.
  2. Disconnect the connector included in the circuit (connector-B in figure) and measure resistance between terminals "A-1" and "B-1". If no continuity is indicated, that means that the circuit is open between terminals "A-1" and "B-1". If continuity is indicated, there is an open circuit between terminals "B-1" and "C-1" or an abnormality in connector-B.
    Fig 2: Measuring Resistance Between Terminals A-1 & B-1
    G04806981Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals