LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (Engine General Information And Diagnosis) >> Diagnostic Information And Procedures >> DTC P0336: Crankshaft Position Sensor Circuit Range/Performance >> DTC Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Troubleshooting

WARNING: This page is about a different car, the 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
DTC TROUBLESHOOTING CHART

Step Action YES NO
1  Was "Engine and Emission Control System Check" performed?  Go to Step 2. Go to ENGINE AND EMISSION CONTROL SYSTEM CHECK .
2  CKP sensor and connector for proper installation check 
  1. Turn ignition switch to OFF position.
  2. Check for proper terminal connection to CKP sensor and ECM connectors.
  3. If connections are OK, check CKP sensor for installation condition.

Is CKP sensor installed properly? 		 Go to Step 3. Repair.
3  CKP sensor check 
  1. Check CKP sensor and sensor rotor referring to CAMSHAFT POSITION (CMP) SENSOR AND CRANKSHAFT POSITION (CKP) SENSOR INSPECTION .

Are they in good condition? 		 Substitute a known-good ECM and recheck. Replace CKP sensor and/or sensor rotor.
scientia non olet · About LEMON Manuals