Transmission Fluid Temperature Sensor A And B Removal And Installation: Installation

WARNING: This page is about a different car, the 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Remove removal procedure to install transmission fluid temperature sensor, noting the following points.

For details of solenoid valves and their connectors installation, refer to AUTOMATIC TRANSMISSION UNIT ASSEMBLY . Use new O-ring.
For details of A/T oil pan installation, refer to AUTOMATIC TRANSMISSION UNIT ASSEMBLY .
Tighten exhaust No. 1 pipe bolts & nuts.
Fill A/T fluid and check fluid level according to procedure described in A/T Fluid Change .
Check for fluid leakage after warming up A/T.