LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Rear Suspension) >> Repair Instruction >> Upper Arm Removal And Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Upper Arm Removal And Installation: Removal

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Hoist vehicle and remove rear wheels.
  2. Remove control rod refer to CONTROL ROD REMOVAL AND INSTALLATION .
  3. Remove trailing rod refer to TRAILING ROD REMOVAL AND INSTALLATION .
  4. Remove lower arm refer to LOWER ARM REMOVAL AND INSTALLATION .
  5. Remove rear suspension knuckle refer to REAR SUSPENSION KNUCKLE REMOVAL AND INSTALLATION .
  6. Remove wheel sensor bolts (1) from upper arm (2).
    Fig 1: Identifying Wheel Sensor Bolts
    G04807890Courtesy of SUZUKI OF AMERICA CORP.
  7. Remove upper arm bolts (1) and then upper arm (2).
    Fig 2: Identifying Upper Arm Bolts
    G04807891Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals