Clutch Fluid Pipe Removal And Installation: Installation
WARNING: This page is about a different car, the 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
Reference: CLUTCH FLUID PIPE AND HOSE INSPECTION
Reverse removal sequence noting the following points.
- Tighten hose bracket nut (1) to specified torque.
Tightening torque
Clutch fluid hose bracket nut a: 10 N.m (1.0 kg-m, 7.5 lb-ft)
- Install each clamp securely.
- After installation, check clutch pedal free travel and bleed air from system.
- Check fluid leakage.
- Add fluid close to MAX level of reservoir.