Door Speakers Installation
WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
- Install the door speaker with the screws.
Tighten:
Tighten the door speaker screws to 2 N.m (18 lb-in.).
- Connect the electrical connector.
- Install the door trim panel. Refer to FRONT DOOR TRIM PANEL INSTALLATION .
- Connect the negative battery cable.