Hood Latch Release Cable Installation
WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
- Install the cable through the engine compartment.
- Install the hood secondary latch. Refer to Hood Secondary Latch Installation .
- Install the cable to the hood release handle.
- Install the hood release handle and the knee bolster with the screw.
Tighten:
Tighten the hood release handle screw to 2.5 N.m (22 lb-in.).