Door Hold-Open Link Installation
WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
- Install the door hold-open link to the door and the body with the bolts.
Tighten:
- Tighten the door hold-open link-to-body bolt to 25 N.m (18 lb-ft).
- Tighten the door hold-open link-to-door bolts to 9 N.m (80 lb-in.).
- Install the door seal trim. Refer to Door Seal Trim Installation