Driver's Side Knee Bolster Installation
WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
- Install the knee bolster with the bolts.
Tighten:
Tighten the driver's side knee bolster mounting bolts to 10 N.m (89 lb-in.).
- Install the instrument panel under cover.
- Connect the hood release cable to the hood latch release handle.
Tighten:
Tighten the hood latch release handle mounting screw to 3 N.m (27 lb-in.).
- Install the coin storage and the screws.