Split Rear Seatback Lock Striker Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

Install the seatback lock strikers with the bolts.
Tighten:

Tighten the rear seatback lock striker bolts to 25 N.m (18 lb-ft).
Install the back panel trim cover with the retaining clips.
Install the rear seat side bolster cushion. Refer to Rear Seat Side Bolster Cushion Installation .
Raise and secure the rear seatbacks in the upright position.

Fig 1: Removing/Installing Seatback Lock Strikers And Bolts
Courtesy of SUZUKI OF AMERICA CORP.