Rear Seat Center Armrest Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

Install the armrest with the nuts.
Tighten:

Tighten the armrest nuts to 24 N.m (18 lb-ft).
Install the rear seatback backside cover with the retaining clips.
Raise and secure the rear seatbacks in the upright position.

Fig 1: Removing/Installing Armrest And Nuts
Courtesy of SUZUKI OF AMERICA CORP.