LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Air Conditioning System) >> Manual >> Diagnostic Information and Procedures >> Leak Testing Refrigerant System >> Testing the Compressor Shaft Seal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Testing the Compressor Shaft Seal

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Blow shop air behind and in front of the compressor clutch/pulley for at least 15 seconds.
  2. Wait 1 - 2 minutes.
  3. Probe the area in front of the pulley. If the detector emits a solid alarm, there is a leak.
scientia non olet · About LEMON Manuals