Inlet Air Door Motor Removal

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the glove box. Refer to GLOVE BOX REMOVAL .
Remove the actuating rod by snapping the rod out of the lever with needle-nose pliers.
Remove the actuating lever.
Disconnect the electrical connector.

Fig 1: Identifying Inlet Air Door Motor Electrical Connector
Courtesy of SUZUKI OF AMERICA CORP.
Remove the motor retaining screws.
Remove the motor.

Fig 2: Identifying Inlet Air Motor & Retaining Screws
Courtesy of SUZUKI OF AMERICA CORP.