Inlet Air Door Motor Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Install the motor.
Install the motor retaining bolts and tighten.

Fig 1: Identifying Inlet Air Motor & Retaining Screws
Courtesy of SUZUKI OF AMERICA CORP.
Install the actuating lever.
Install the actuating rod.
Connect the electrical connector.
Install the glove box. Refer to GLOVE BOX INSTALLATION .
Connect the negative battery cable.

Fig 2: Identifying Inlet Air Door Motor Electrical Connector
Courtesy of SUZUKI OF AMERICA CORP.