LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Aux. Emission Control Devices) >> Repair Instructions >> Exhaust Gas Recirculation Valve Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Exhaust Gas Recirculation Valve Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the El system ignition coil adapter mating surface.
  2. Install a new EGR valve gasket.
  3. Install the EGR valve with the bolts.

    Tighten 

    Tighten the exhaust gas recirculation valve retaining bolts to 30 N.m (22 lb-ft).

  4. Connect the vacuum hose to the EGR valve.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals