Heater Hoses Installation
WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
- Install the left heater hose to the coolant inlet line fitting. Slide the end of the heater hose over the coolant fitting until the hose is seated.
- Install the right heater hose to the fitting below the intake manifold. Slide the end of the heater hose over the fitting until it is seated.
- Install and seat the other end of each heater hose.
- Compress and slide the spring clamps into position on the heater hoses and release the tension.
- Fill the cooling system.
- Check the hoses for leaks.
- Lower the vehicle.