LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Heater And Ventilation) >> Repair Instructions >> Blower Resistor Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Blower Resistor Removal

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the glove box. Refer to GLOVE BOX REMOVAL .
  3. Remove the footwell upper cover. Refer to INSTRUMENT PANEL REMOVAL .
  4. Disconnect the electrical connector at the resistor.
  5. Remove the mount screws from the resistor.
  6. Remove the resistor from the heater/air distributor case by gently pulling the resistor downward.
    Fig 1: Identifying Blower Resistor & Electrical Connector
    G04720787Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals