LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Heater And Ventilation) >> Repair Instructions >> Blower Motor Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Blower Motor Removal

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the glove box. Refer to GLOVE BOX REMOVAL .
  3. Remove the footwell upper cover. Refer to INSTRUMENT PANEL REMOVAL .
  4. Remove the blower motor cooling hose.
  5. Remove the motor and the seal from the heater/air distribution case by gently pulling the motor straight down and out.
  6. Remove the screws that secure the motor to the heater/air distributor case.
  7. Remove the motor, the seal and the shock mount pads from the heater/air distributor case by gently pulling the motor straight down and out.
    Fig 1: Identifying Motor, Screws, Seal And Shock Mount Pads
    G04720783Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals