Steering Wheel Removal

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required:

KM-210-A Steering Wheel Puller

Disconnect the negative battery cable.
Remove the SIR module. Refer to DRIVER AIRBAG MODULE REMOVAL .
Remove the steering wheel nut and the retaining clip.

Fig 1: Identifying Steering Wheel Nut And Retaining Clip
Courtesy of SUZUKI OF AMERICA CORP.
Remove the steering wheel using the steering wheel puller KM-210-A.
CAUTION: In order to install the steering wheel correctly, match-mark the steering column shaft to the steering wheel.
Unclip the contact ring from the steering wheel, if necessary.

Fig 2: Identifying Steering Wheel Puller
Courtesy of SUZUKI OF AMERICA CORP.