LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Steering Wheel And Column) >> Repair Instructions >> Headlamp / Turn Signal Switch and Lever Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Headlamp / Turn Signal Switch and Lever Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connections to the turn signal switch.
  2. Install the turn signal switch by snapping it into the switch housing.
    Fig 1: Identifying Turn Signal Switch Electrical Connections
    G04719867Courtesy of SUZUKI OF AMERICA CORP.
  3. Install the upper and the lower steering column cover panels. Install the upper and the lower steering column cover panel screws.

    Tighten: 

    Tighten the upper and the lower steering column cover panel screws to 2.5 N.m (22 lb-in.).

  4. Connect the negative battery cable.
    Fig 2: Identifying Upper And Lower Steering Column Cover Panel Screws
    G04719866Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals